ZIEHL-ABEGG Dcontrol PKDM6, Руководство по эксплуатации

Страница: 34 / 40

Maximum cross section for line
and motor connection
•
PKDM6...20: 2,5 mm
2
•
PKDM25/35: 10 mm
2
•
PKDM25/35E: 10 mm
2
•
PKDM50/80E: 35 mm
2
11.1.1 Max. load depending on ambient temperature
The maximum permissible temperature for the rated current at rated voltage is speci
fi
ed as rated
temperature.
Since the dissipation of the power loss (heat development) in the device is decisively dependent on
the ambient temperature, the max. load must be reduced at an ambient temperature above the rated
temperature (see following table)!
The average value measured during a 24 h period must be 5 K under the max. ambient temperature.
For installation in a switch cabinet, the device
’
s dissipation and its possible affect on the ambient
temperature must be taken into consideration!
Maximal motor current depending on ambient temperature for versions with internal fuses
Type Part-No.
40 ° C 45 ° C 50 ° C 55 ° C
[A] [A] [A] [A]
PKDM6 304587 6 5.5 5.0 4.5
PKDM10 304588 10 10.0 9.0 8.0
PKDM12 304589 12 11.0 10.0 9.0
PKDM15 304590 15 13.5 12.0 10.0
PKDM20 304591 20 20.0 18.0 16.0
PKDM25 304592 25 25.0 22.5 22.5
PKDM35 304593 35 35.0 35.0 31.5
PKDM50 304631 50 44.5 39.0 33.5
PKDM80 304632 80 71.2 62.4 53.6
Maximal motor current depending on ambient temperature for versions without internal fuses
Type Part-No.
50 ° C 55 ° C
[A] [A]
PKDM10Z 304601 10 9.0
PKDM12Z 304602 12 10.0
PKDM15Z 304603 15 12.0
PKDM20Z 304604 20 18.0
PKDM25Z 304605 25 22.5
PKDM35Z 304606 35 35.0
PKDM25E 304622 25 22.5
PKDM35E 304623 35 31.5
PKDM50E 304635 50 44.5
PKDM80E 304636 80 71.2
Operating Instructions Dcontrol
–
model series PKDM6..80 Enclosure
L-BAL-E143-GB 1914 Index 009 Part.-No.
34/40