ZIEHL-ABEGG Acontrol PKE-6, Руководство по эксплуатации

Страница: 16 / 27

9 Setting for operation
9.1 Speed controller 1.01
9.1.1 Setting for operation as Speed controller
Signal to:
E1
E1 GND
14.02.2008
v_signal_e1.vsd
E1
Setting via external signal or external potentiometer
Setting range: Output voltage from approx. 0 - 100 % of connected line
voltage or in range of settings “ n-min ” up to “ n-max ” .
(Potentiometer set without function)
%
0 100
n-min
R
4
8
28.08.2008
v_nmin_pke.VSD
n-min
Setting of output voltage at the device 0 - 100 %.
For setting via external signal: Minimum output voltage (basic speed)
Setting range: 0 - 100 % (
“ n-min ” takes priority if over “ n-max ” ).
28.08.2008
v_nmax_pband_pke.VSD
n-max /
P-band
R
4
9
%
5 30
n-max / Pband
Maximal output voltage (speed limiter)
Setting range: 100 % - “ n-min ”
(100 % output voltage = fully clockwise position 30 %)
9.1.2 Diagram: setting signal and speed
nM
50 %
100 %
0 1 2 3 4 5 6 7 8 9 10
10 9 8 7 6 5 4 3 2 1 0
0 2 4 6 8 10 12 14 16 18 20
20 18 16 14 12 10 8 6 4 2 0
4 5,6 7,2 8,8 10,4 12 13,6 15,2 16,8 18,4 20
20 18,4 16,8 15,2 13,6 12 10,4 8,8 7,2 5,6 4
0 – 10 V
10 – 0 V
0 – 20 mA
20 – 0 mA
4 – 20 mA
20 – 4 mA
Min.
Min. 0 % Max. = 100 %
Min. 35 % Max. = 85 %
05.02.2008
v_nmotor_101_miluab.vsd
Si
Idealized principle diagram
nM Motor speed
Si Signal
Operating Instructions Acontrol – model series PKE-6 /-10 / PKE-14 Setting for operation
L-BAL-E042-GB 1002 Index002 Part.-No. 00163314-GB
15/26