ASSEMBLY INSTRUCTIONS
Turn the CART TABLE (F)
LEGS (A), (B), (C), (D) as shown so that the legs all lean outwards. Matching the
colour coded stickers makes this easier. The RIGHT SIDE LEGS (C) AND (D)
with axle holes need to be both on the same side as shown. Secure each leg
with one M6 X 50mm BOLT (M) and one M6 NUT (N). Don’t fully tighten yet.
Step 1
M6 X 50mm BOLT (M) 4PCS
NUT(N) 4 PCS
SPANNER (R) 1 PC
ALLEN KEY (Q) 1 PC
LEFT FRONT LEG (A)
LEFT BACK LEG (B)
FRONT
RIGHT BACK LEG (D)
(WITH AXLE HOLE)
RIGHT FRONT LEG (C)
(WITH AXLE HOLE)
TABLE (F)
