BIOS
Setup
Video OFF Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the
Video Electronics Standards to select video power man-
agement values.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choices: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system “hung”.
The choices: Delay 4 Sec, Instant-Off.
State After Power Failure
The choices : Auto, On, Off.
Wake Up Events
Wake Up are I/O events whose occurrence can prevent the system from entering
a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything which occurs to a device which is configured as
On, even when the system is in a power down mode.
VGA
When Enabled, you can set the VGA awakens the system.
LPT & COM
When On of LPT & COM, any activity from one of the listed system peripheral
devices or IRQs wakes up the system.
Page 35
Mainboard User's Manual
