Page 24
Mainboard User's Manual
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the
computer. If it is set to “Enabled”, BIOS will shorten or skip some check items
during POST. The default value is “Disabled”.
First / Second / Third Boot Device
This feature allows you to select the system first boot device. The options are
Floppy, LS120, HDD-0, SCSI, CD-ROM, HDD-1, HDD-2, HDD-3, ZIP100,
LAN, Disabled.
Boot Other Device
This feature allows you to system to select other boot device automatically.
Swap Floppy Drive
This feature allows you to enable the system swap floppy function, the default
is “Disabled”. When this function enables, the system will assign the Drive
A as Drive B, and vice versa.
Boot Up Floppy Seek
The default setting is “Enabled”, so that the BIOS will search for floppy disk
drive during boot up. If disabled, BIOS will not search for the type of floppy
disk drive by track number. Note that there will be no warning message
if the drive installed is 360K.
Boot Up NumLock Status
It determines the Num-Lock LED on keyboard is turned on/off. When the
system is powered on so that the end user can use the arrow keys on both the
numeric keypad and the keyboard. The default value is “On”.
Gate A20 Option
This entry allows you to enable the A20 address line access. The default
is "FAST".
