manualshive.com logo in svg

Zida 6mlx, Руководство пользователя

Поделиться
Скачать
Zida 6mlx Скачать руководство пользователя страница 32

Motherboard Installation

Page 30

Chipset Setup,

 

Continued

Fixed Memory Hole  This option specifies the location of an area of memory that cannot be

addressed on the ISA bus. The settings are Disabled, 15 MB-16 MB, or 512KB-
640KB. The Optimal and Fail-Safe default settings are Disabled.

TypeF DMA BufferControl1
TypeF DMA Buffer Control2  These options specify the DMA channel where TypeF buffer control

is implemented. The settings are Disabled, Channel-0, Channel-1, Channel-2,
Channel-3, Channel-5, Channel-6, or Channel-7. The Optimal and Fail-Safe
default settings are Disabled.

DMA-0 Type
DMA-1 Type
DMA-2 Type
DMA-3 Type
DMA-5 Type
DMA-6 Type
DMA-7 Type

These options specify the bus that the specified DMA channel can be used on. The
settings are PC/PCI, Distributed, or Normal ISA. The Optimal and Fail-Safe
default settings are Normal ISA.

AGP Aperture Size  This option specifies the amount of system memory that can be used by the

Accelerated Graphics Port (AGP). The settings are 4 MB, 8 MB, 16 MB, 32 MB, 64
MB, 128 MB, or 256 MB. The Optimal and Fail-Safe default settings are 256 MB.

System Type

This option sets the system type. The settings are Auto (AMIBIOS automatically
determines the system type), DP, or UP. The Optimal and Fail-Safe default settings
are Auto.

Cont’d

Содержание 6mlx
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды