Wiring Condition Display Indication
N G H
Correct Wiring ● ● ●
No Ground ●
○
●
Polarity Reversal ¤ ● ¤
Open/Hot Neutral
○
○
○
Legend: ● On
○
Off ¤ Flashing
If the wiring condition is other than normal, the Test is
limited on its measurements that can be performed. If a
no ground condition exists, only the line voltage
measurements are available.
Notes:
1) Will not detect two hot wires in a circuit.
2) Will not detect a combination of defects.
3) Will not detect reversal of grounded and
grounding conductors.
Voltage test:
Never apply voltages exceeding 300V to input sockets.
Connect mains lead (13) to the mains connector
Select function V via the function switch
Connect the test leads /mains plug to UUT
