Operating Instructions
Page 3
To store standard and steel "E" cylinders:
1. Place bottom of cylinder against Return Spring Assembly (8 & 9).
2. Lower cylinder through the latches (4 & 5), until both click into the locked position.
3. Check that the cylinder is now secure against the latches.
Note: For additional security, extra holes are provided in E-Cyl. Bracket Form (1) to add a strap if desired.
To remove cylinders:
1. Slightly press cylinder against the E-Cyl. Bracket Retainer (1) to relieve pressure on the latch.
2. Squeeze latch handles inward, toward each other, to disengage the latches.
3. Lift the cylinder free of the latches and remove from bracket.
Mounting Instructions
- Mount horizontally.
- Brackets may be mounted side by side.
- Minimum of 3 mounting points using 1/4" screws for both Bracket Retainer (1) and Bracket Base (2).
- Mounting surface must be able to withstand a pull-out force exceeding strength of screws.