Zico QUIC-LIFT PTS-HA-24, Запчасти и инструкция по эксплуатации

Страница: 8 / 32

VII. MAINTENANCE
A. Periodic
Any time the tank boxes (9 & 10) appear to be "loose", refer to Actuator Adjuster (Section V. A.).
B. Semi-Annually or at Scheduled Apparatus Lube Service
1. Actuator Adjuster (7) (page 10) - Check for loose bolts; refer to adjustment directions
(Section V. A., page 6).
2. Lubrication - We suggest that all pivoting surfaces be sprayed in the joints and pivot points
with CRC brand Stor&Lube long-term lubricant and rust preventative #03032. Excess lubrication
should be wiped off.
3. Hydraulic Actuator - We suggest the exposed shaft be cleaned and sprayed with WD-40 or a
similar light, moisture-repelling silicon-type lubricant.
C. Pressure Washing
WARNING: Do not operate pressure washer on or anywhere around the hydraulic actuators.
Excessive pressure may allow soap and water to blow past the seal, damaging the actuator.
VIII. SERVICE
If you experience any problems with your Hydraulic Portable Tank System, please call us at
1-800-711-FIRE (3473) for assistance. Please have the serial number of your System available.
-8-