N
STORAGE (END OF THE HEATING SEASON)
At the end of the heating season, you must store the heater in a dust-free place, if
possible in its original packaging. Unused fuel cannot be used in the next heating
season. We therefore recommend that you burn up all fuel. If there is still some
fuel left, do not throw it away, but dispose of it in accordance with the local
regulations for the disposal of domestic chemical waste.
Always start the new heating season with fresh fuel. When you start re-using the
heater follow the instructions again
(starting from section A and as specified)
.
O
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
Let the heater cool down.
Remove the removable tank
!
from the heater and remove the fuel filter
(refer to Section M, Fig. L).
Some drops may leak from the filter; keep a cloth
at hand. Store the fuel filter and the removable tank outside the heater.
Place the transportation cap into the position of the fuel filter (Fig. M).
Press it tight. The transportation cap will, as much as possible, prevent oil
leakage from the heater during transport.
Always move the heater in an upright position.
Make the fixed tank empty with a fuel pump before transportation or in case
of wrong or dirty fuel. First remove the fuel filter and then insert the fuel
pump into the empty fixed tank. Follow the same procedure if the fuel tank
contains water.
P
SPECIFICATIONS
Ignition
electrical
Dimensions (mm)
width
376
Fuel
paraffin
including base plate:
depth
296
Capacity (kW) max.
3.20
height
428
Capacity (kW) min.
0.80
Accessories:
- manual fuel pump
Suitable space (m
3
)
**
50-120
- transportation cap
Fuel consumption (l/hr)
*
0.333
Mains
230 V
-- AC / 50 Hz
Fuel consumption (g/hr)
*
267
Electrical consumption:
Burning time per tank (hr)
*
16.2
- igniter
320 W
Capacity removable tank (litres) 5.4
- continuous
13 W
Weight (kg)
8.0
Fuse rating
250V, 5A
* At maximum setting ** Specified values are indicative
1
5
2
4
3
4
60
Transportation
cap
M
! ! !
