GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for
using your heater. For more details, please refer to
the MANUAL (pages 53 ff.).
•
The first time you ignite your heater it will smell
like ’new’ for a short time.
•
Store your fuel in a cool and dark place.
•
Fuel has a limited shelf life. Start every heating
season with new fuel.
•
The right quality of fuel will be assured, when
you use Zibro Premium Quality Fuels for your
heater.
•
If you change to another brand and/or type of
paraffin oil, you must first finish up all the
remaining fuel in the heater.
•
Avoid any contact with the top plate and grille.
MAIN COMPONENTS
OFF - button
Knurled wick
adjustment knob
Ignition button
Combustion
chamber
Combustion
chamber handle
Fuel indicator
Grill
Lid for removable
tank
Removable tank
Fuel gauge
removable tank
Ignition coil
Battery holder
Air quality control
system
Remove all packaging materials (refer to Section A, Fig. A).
Fill the removable tank
and wait 30 minutes before you
ignite the heater (refer to Section B, Fig. I).
Insert the batteries into the battery holder
(refer to Section A, Fig. G).
Check whether the combustion chamber
is fully upright
(refer to Section A, Fig. F).
Ignite the heater by turning the knurled wick adjustment
knob
as far to the right as possible and then gently push the
ignition button
(refer to Section C, Fig. K and L).
After igniting the heater it will take 10 to 15 minutes before
you can check if the heater burns well (refer to Section D).
Switch off the heater (refer to Section E).
1
2
3
4
5
6
7
4
51
p50_61_uk_R224C.qxd:p50_61_uk_R22xC.qxd 30-05-13 17:07 Page 51
