S
HUTTER
I
NFO
G
ENERAL
U
SE
S
HUTTER
A
CTIVATION
To open the shutter for
viewing, place coin (quarter unless otherwise set)
in coinslot. Shutter will remain open for the amount
of time set internally (normally 30sec. to 1 min.).
C
OIN
R
ETURN
To return a coin just inserted, press the silver coin
return button just beneath the coin slot immediately after inserting
coin. the coin will be returned in the slot below the coin return but-
ton.
S
ETTING
S
HUTTER
T
IME
To set the amount of time you would like
the shutter to stay open for each coin, use the settings on the control
panel timer setting. Using the range setting and timer dial, set the
shutter to be open from 0 - 50 mins.
R
EPLACING
F
USE
To replace the control box fuse, unscrew fuse hous-
ing by turning counterclockwise. Pull the old fuse out of the fuse
housing and replace with a new 0.75Amp fuse. Replace fuse housing
in socket and tighten by turning clockwise. Be sure to use a 0.75Amp
fuse, as a higher powered fuse may result in electrical damage to the
control panel
I
NTEPUPILLARY
D
ISTANCE
(IPD) A
DJUSTMENT
To adjust the Interpupillary
Distance (IPD) between
the barrels, grasp the ridged
front of the eyepieces and
spin inward or outward.
The IPDshould be set so
that one image circle is seen
and viewing is comfortable
for the user.
E
LEVATION
A
DJUSTMENT
DJUSTMENT
E
LEVATION
A
DJUSTMENT
front of the eyepieces and
IPD A
To adjust the elevation
height of the binoculars,
place hands underneath
the binocular body in
lift up or pull down. The
binocular housing should
swivel up or down. The
elevation adjustment may
be a litttle stiff at first,
but should loosen up
with use.
area of each barrel just in
