M
ODE
I
NSTALLATION
T
IMER
S
ETTINGS
ASSEMBLY
1
Mount pier to base by inserting raised ring on pier into base open-
ing and securing with M10X20 mounting bolts (included) through
pre-drilled holes. Tighten bolts to ensure stability.
2
Secure base to mounting platform where unit will be used. (See
base installation below)
3
Attach mounting plate to top of control box with raised ring fac-
ing up. Secure mounting plate to control box using M2.5X5 hex
bolts (included). Tighten bolts to ensure stability.
4
Mount binoculars by setting them atop the mounting plate so
that mounting plate ring is centered in recess on the binocular
base and control cord enters the control box through the center hole
of the mounting plate. Attach binoculars to mounting plate using
M6X20 bolts (included). Tighten bolts to ensure stability.
5
Thread shutter control cable from binoculars onto shutter connec-
tion being careful not to bend connection prongs.
B
ASE
I
NSTALLATION
Mount the pier base on stable, level ground using the included
mounting bolts. Anchor bolts into concrete or steel base which is
either anchored securely to the ground or a minimum of 10 in diame-
ter to ensure stability. If improperly mounted, the unit may tip.
R
ANGE
Range adjusts the timer dial to longer or shorter ranges of time
from which to shoose. To choose between smaller increments of time,
use a small screwdriver to turn the range setting counterclockwise.
For larger increments of time, turn the range setting clockwise.
Mode allows you to access the different operating modes for
the Vista. The indicator window directly above the mode dial shows
what operating mode the Vista using a signifying letter. Turn the
mode control to the desired setting using a small screwdriver.
T
IMER
D
IAL
Once the desired range has been set, the timer dial
allows you to set the amount of time that the shutter will remain open
once actuated by a coin. The lower, central window states what
increment of time the numbers stand for.
M
ODE
S
ETTINGS
SF, OS, OF1
- Standard Operating
Modes: Shutter is opened when coin is
inserted.
FL, FO
- Flash Modes: shutter is alter-
nated between open and closed accord-
ing to time setting.
ON, OF
- Open Modes: Shutter is
opened and remains open until
switched to a different mode.
OC
- Open/Close Mode: Shutter is
opened and closed quickly at end of
time setting.
