cause is that welding time is too long or too short. The welding point cannot be
heated for too much time. And the electric iron also cannot be moved away from
the welding point too early. Only when welding tin melts to bright silvery white
can the electric iron be moved away.
2. After welding, please melt a little solder on the welding mouth before putting
the iron back to the frame and turning off the machine. Clean away excrescent
solder on the fiery welding mouth with wet sponge before starting welding next
time.
Technology specification:
Power supply voltage: 230volt
(
220volt-240volt
)
/50HZ
Electric iron power: 50watt
Equipment power supply fuse: T500mA/250volt
(
50X20mm glass pipe
)
Regulating scope of temperature: 150
0
C----450
0
C
Temperature display: 2 * 3
1/2
grades LCD display
,
display scope:150
0
C----450
0
C
Display precision: 5%
Circumstance humidity: +5
0
C----+40
0
C, relative humidity
<
85% (not in
humidification)
Atmospheric pressure: 600 hPa---1000 hPa
Shell size: 195X87X165mm width/height/depth
(
without electric iron
)
Weight: about 2000 gram
ZD-931
SOLDERING STATION WITH DIGITAL DISPLAY TEMPERATURE
•This weld machine is an ideal welding tool for an amateur fancier, school, car of
electronics ,and for maintaining the service , producing with laboratory.
•The weld machine is installed with electric soldering iron frame and the sponge
for tidying up glue
•It is equipped with LCD digital temperature display which can display set
temperature and factual temperature simultaneously.
•outer shell construction is tightly and firmly packed, and it has a good function to
insulate the aegis.
• electronic sensor controlling the temperature
━
•due to the usage of highly electrified components, the heat time supposes to be
short.
•It is installed with 50tile electric soldering irons, and the suitable usage scope is
extensive.
•the electric soldering irons is supposed to work under safe and low electric
voltage.
•It has the precise function of regulating temperature,1 degree or 10 degrees per
grade can be regulated through the temperature regulating button.
•the regulating scope of temperature is 150 ―450 .
℃
℃
•It is installed with the compensating electric outlet which can protect the
intelligent components.
•when operation breakdown takes place, warnings will appear through screen
display and sound.
•when using the weld machine for the first time, you are required to read the
1
8