Zhone zNID-GPON-2402, Руководство по настройке

Страница: 205 / 226

VLANS
zNID 24xx Series Configuration Guide
205
d
From the VLAN | Settings page click Edit Port Defaults
Figure 165: Setting PVID for the ports
e In the PVID text box for GE1 - GigE eth1 , enter 500 (the same as the
ID for the VLAN)
f From the Uplink eth0 should be selected
Selecting the Fiber WAN interface adds this VLAN to the uplink.
g Click Save/Apply
NAT and DHCP
In this example the ONU will have all ports as untagged. The ONU will
provide the IP addresses to the connected devices through DHCP. Note the
each port has its own DHCP server. The addresses given out on each port
must be in a different subnet. In this example, each port is set to give out 10 IP
addresses. The ONU will perform NAT on the uplink interface to translate the
public IP address to one of the private addresses.
With this configuration, the subscriber should be able to connect a PC to the
Ethernet port, obtain an address and be ready to surf the Internet.
To setup NAT and DHCP
1
Define a routed VLAN