Mounting the SkyZhone to a pole
SkyZhone 1624, 1424, 1224 Hardware Installation Guide
31
Figure 11: Bracket attached to the mounting plate attached to the pole
5
Adjust the shelf until it is level by rotating the unit along the curved slot
tracks.
6
Once the unit is level, securely tighten the center nut and four bolts that
hold the shelf to the pole mount bracket as shown in
Figure 11
.
7
Attach the antennas to the unit.
Note the antennas are different sizes. The three longer antennas are
connected to the top of the unit. The two shorter antennas are mounted to
the bottom of the unit. The antennas are not interchangeable. It is critical
that the longer antennas are on the top, and the shorter ones on the bottom
of the unit.
8
Slide the unit into the sun shield housing.
9
Secure with 4 (four) tamper-resistant screws, provided in the mounting
kit, through the holes on the front of the unit.
10
Attach the SHDSL cable to the SHDSL connector.
11
Attach the Ethernet cable if it is being used.
12
Secure the cable(s) to the pole with cable ties to provide strain relief, if
needed.
Содержание SkyZhone 1224
Страница 42: ......
Страница 52: ...Safety Regulations and Certifications 52 SkyZhone 1624 1424 1224 Hardware Installation Guide ...