Zhone ETHX-2214-DS3, Руководство по установке

Страница: 18 / 28

18
Configuring Provider or Subscriber Modes
To reconfigure a unit from Provider (factory default) to Subscriber mode, open the web
management home page as described above. Observe the designation displayed on
the top-right side of graphical view of the front of the unit (just under the Zhone Logo).
It will display either the word “Provider” or “Subscriber” indicating the current mode of
the unit.
To make a change, click on the Pro/Sub Cfg button which is located just left of center
on the graphical view of the front of the unit. This will bring up the following screen:
Click on one of the radio buttons associated with the desired mode for the unit. Then
click on the submit button. Go back to the home page and confirm that the display now
shows the new operating mode.