Zhone 6381-A4-200, Руководство пользователя

Страница: 90 / 131

6381-A4 Router Users Guide
90
same protocol to be able to communicate with each other. The following procedure shows you
how to enable and configure the dynamic routing feature on your RG.
Enable RIP Enables/disables RIP.
Protocol The following three RIP versions are available:
•
RIP v1 (UDP protocol)
•
RIP v2 (multicast protocol)
•
RIP v1 compatible (UDP protocol with multicast format)
Note: Routers using RIP v1 or RIP v1-compatible protocol can talk to each
other, but not to routers using RIP v2 protocol.
Enable Password This is an optional field. RIP version v2 compatibility allows you to provide
simple plain-text password-based authentication to RIP packets. This field is
disabled if RIP v1 protocol is selected.
Password The password can be up to 16 characters long.
Direction Normally when RIP is enabled on a router, it dynamically learns/provides routes
on all its configured interfaces. This parameter allows you to select the
interfaces on which RIP is expected to learn and distribute routing information.
This feature allows you to control how and which routes get distributed through
the network. For example, by selecting In only mode, routes to private LAN
networks are prevented from being sent over to the WAN-side router.
To enable dynamic routing:
1. From the navigation bar at the top of the screen click Advanced
2. From the left hand navigation pane select Dynamic Routing.
3. If appropriate, select Enable RIP and from the Protocol dropdown select the appropriate
version of RIP.
The protocol is dependent upon the entire network. Most networks support RIP v1. If RIP v1
is selected, routing data will be sent in RIP v1 format. If Rip V2 is selected, routing data will
be sent in RIP v2 format using subnet broadcasting. If RIP V1 Compatible is selected,
routing data will be sent in RIP v2 format using multicasting.