6310-A2-ZN12-10
6310-A4 ReachDSL Modem
7
Installing the Hotwire 6310 ReachDSL v1
Modem
Place the ReachDSL modem on a flat surface with clearance for the rear connectors.
Procedure
1
If a telephone is connected at the RJ11
wall jack where the modem will be installed,
unplug the telephone line from the wall jack.
2
Connect a telephone to the modem. (Optional –
go to
Step 3
if you are not connecting a
telephone to the ReachDSL modem.)
Plug the existing telephone interface cable that
was unplugged in
Step 1
into the jack labeled
PHONE.
3
Use the supplied RJ11 6-pin interface cable for
the LINE connection. Insert one end of the cable
into the jack labeled LINE. Insert the other end of the cable into the RJ11 wall jack.
NOTE:
If you are installing a POTS splitter with another telephone, connect the telephone to
the jack labeled PHONE, then connect the jack labeled LINE to a wall jack. Do NOT
plug any cable into the POTS splitter jack labeled either MODEM or DSL. In
particular, make NO connections between a POTS splitter and the modem.
01-17015a
RJ11
Wall Jack
01-17015
RJ11
Wall Jack
PHONE LINE
ETHERNET
POWER
RJ11
6-pin
Interface Cable
PHONE
LINE
