Zhiyun CRANE-M3, Руководство пользователя

Страница: 32 / 44

28
Firmware Upgrade and Calibration
Method 1: Six-side calibration via APP：
According to the method introduced in "How to Use the App", please connect the
gimbal to the APP, and enter "Settings"- "Six-side Calibration", then conduct the
six-side calibration according to the prompt.
Method 2: Six-side calibration via "Zhiyun Gimbal Tools":
Power on the gimbal and enter standby mode. Connect the charging/firmware
upgrade port of the gimbal to the computer with the Type-C USB cable, Open
"Zhiyun Gimbal Tools", click "open" on the top and click "calibration" on the
bottom. Please conduct the process according to the following steps. A " √ "
mark will appear after the calibration is complete.
Six-side Calibration
① Please refer to the six-side calibration steps below. After the calibration
completes, please restart the gimbal.
② In simple terms, six-side calibration is to place all six sides of the tilt axis
in vertical to a level surface respectively.
Calibration Reason How to calibrate
1. Slight deviation is found in the level position after the
initialization of the gimbal.
2. The gimbal has not been used for a long time.
3. The gimbal undergoes significant temperature differences
in operation environments.
Six-side
Calibration