Zhermack SATOVAC 1, Руководство пользователя

Страница: 115 / 168

115 of 168
MAINTENANCE AND USE MANUAL
EN
SATOVAC
5.3
TRANSPORT AND MOUNTING
Failure to observe the above exonerates the Manufacturer from any liability
concerning equipment malfunction and consequently renders the Warranty null
and void.
When shipping/delivering the equipment to your Authorised Servicing Centre
always enclose a copy of the purchase document and a copy of the properly
compiled ID form.
If the unit is to be transported by courier, the postal service or rail it is
recommended such shipments be insured.
If it is necessary to move the machine, you must:
1. disconnect the machine from the electrical system;
2. empty the oil contained in the machine (follow the instructions given in section 8.2.1).
3. pack the SATOVAC vacuum pump in its original box or, if this is not possible, take all the
necessary precautions to protect the machine against knocks or drops, in that the goods are
transported at the owner's risk.
To this end always bear in mind the weight and dimensions of the unit being handled (see
section 4.2.3) to prevent any damage caused by inobservance of these measurements.
Before packaging the equipment for transport the oil contained in the pump should
always be emptied via the drain plug (10).
Use of protective gloves is highly advisable.
5.4
ELIMINATION / DISMANTLING
When disposing of the packaging materials the user must comply with the standards in force in his/
her country regarding the following materials:
• Wood/paper: non-polluting materials, but must be recycled properly.
• Polystyrene/plastic: pollutants which must not be burnt (toxic fumes) nor dispersed into the
environment, but disposed of in compliance with the standards in force in the country of use.
If the machine is to be dismantled the user must, in compliance with EC directives and the laws in
force in the country of use, effect elimination and recycling of the following materials:
• Plastic and glass parts, insulated electrical wiring, rubber parts.
• There are no toxic or corrosive parts.
As far as disposal of the oil in the machine is concerned, remember that it is a pollutant: do not dump
carelessly. Dispose of waste oil properly.
This product must not be disposed of as household waste but rather, when no
longer used, must be collected separately according to EC Directive 2002/96.