Initial
Installation
EN 4161.758.101m – 2018-09
23
4.3.7.1
Spindle cooling (TSC) version,
feeding emulsions, hydraulic oils or
air-oil mixtures
Mounting gearbox on motor:
Coat thread of connecting piece (1) with bonding
agent. Screw connecting piece with pre-
assembled and greased O-rings (2) into motor
shaft (3) by hand until stop is reached. Use torque
wrench (WAF 14) to tighten connecting piece to
130 Nm, blocking the motor shaft in the process.
Follow the description provided in Chapter 4.3.7
for the rest of the mounting process.
1
Connecting piece
2
O-rings
3
Motor shaft (hollow shaft)
