ZF 400 Family, Руководство по эксплуатации

Страница: 22 / 28

Maintenance
22
EN_3224.758.102c_2020_02
5.4 Suction filter check
The intake filter must be inspected and cleaned after the first 50 hours of navigation, and subsequently every 250 hours
and/or 6 months. The filter is located on the inlet side of the oil pump.
Removal procedure:
remove the plug (5), the filter (4) and the seal (6), replacing it with a new one, then clean the filter. The plug (5) must
be tightened with a torque of 100 Nm.
5.5 Oil filter replacement
Turn the cartridge (7) counter-clockwise using an appropriate tool until it has been completely removed. Clean the filter
attachment base. Dampen the seal of the new cartridge with oil, then tighten it firmly using the hands alone.
Storage
If the transmission must be stored away for an extended period of time, it must be completely filled with oil through
the oil dipstick. Change the oil when the transmission is put into operation.
6
5
4
Fig. 5
7
Fig. 6