Web Server
~
15
~
5.3
Ethernet
Clicking the “Ethernet” tab will open the Ethernet page. On this page you can set
the Ethernet port parameters. You can set the ComBox using a static IP address
or obtaining the IP address automatically.
Fig. 5-4: Ethernet page
5.4
Advanced
The Advanced web page shows the advanced settings of the ComBox, Such as
the power management and safety setting.
In addition, the firmware of the ComBox and Inverter can be upgraded from this
webpage.
5.4.1
Power Management
The ComBox can regulate the power of the inverter according to the value of
installed inverter capacity or the energy meter reading, which are set by the
user.
a)
Active Power Limit
Tick “Active Power Limit” and fill in the total Inverter AC capacity to active Power
limit function. There are three modes of active power limitation which can be
selected.
1. Please make sure the inverter AC capacity is correct,
otherwise the power limitation function cannot work
properly.
