Zeversolar ComBox, Инструкция по установке и эксплуатации, Страница: 7 / 35

Mounting
~
6
~
3. Mounting
3.1 Preparation
Table 3-1: Preparation
Type Requirements Quantity
Network
cable
1. Comply with the standards for structured cabling
according to EIA/TIA-568.
2. Shielded Ethernet cable (CAT-5E or higher).
3. UV resistant if used outdoors.
Max. 100m
3.2 Assembling the ComBox
3.2.1 Electrical Checks
Risk of lethal electric shock when opening the inverter may cause death or
serious injury. Therefore before assembly, ensure that the inverter is isolated
from all sources of AC and DC power (see inverter Installation Guide).
Electrostatic discharge can damage the inverter. Please ground yourself before
touching components by touching the protective conductor (PE) or a non-coated
part of the inverter enclosure.
1. In order to ensure safety, before assembly, please
read the inverter user manual carefully.
2. Assembly is strictly prohibited when the inverter
connected to electricity or is in operation.
3.2.2 Assembly
For details regarding mounting please refer to the ComBox Quick Installation
Guide.