Place one strap on each side of the bike from the luggage rack to the tie down point,
This is your primary side to side bracing. Use a piece of cloth under the hook to prevent
paint damage to the rack or body.
Place one strap on each side of the bike on the swing arm rear by the shock pulling
backward at least 45 degrees or more. This is to prevent the bike from moving forward
on braking of the transport vehicle.
Place one strap on each side of the bike wrapped around the swing arm at the forward
most position and angling forward at 45 degrees or more. This is to stop the bike from
going backward. (shown here without cloth paint protection under hook merely for
clarity)
