0010015608-01.1V
6.5 Gas connection
6.4 Water connection
2
1
0010015352-01.1V
16
6720871998 (2019/10)
[1] Cold water
sions of the device (ÿTable 5),
– be insulated with suitable material (Fig. 12),
No 305/2011.
Fig. 12
ÿ Ensure that the end of the duct is placed inside the ring and
supported in the fittings.
[2] Hot water
ÿ Identify the water inlet and outlet piping to avoid possible
replacement.
– have wind/rain protection at the end.
are from work.
In order to avoid problems caused by sudden pressure changes
in the supply, it is advisable to install a non-return valve upstream of
the device.
Failure to comply with applicable legal standards could result in a
fire or explosion, causing material damage, personal injury or even
death.
DANGER:
All non-original accessories must be certified according to the
Construction Products Regulation (EU)
Installation (only for specialized and qualified technicians)
Fig. 13 Water connection
Intoxication!
Leakage of combustion gases into the appliance installation
compartment.
If the burnt gas duct passes through walls and/or furniture with
flammable materials:
Materials damage!
ÿ Check the tightness of all connections after completing
Fire or explosion!
ÿ Thermally insulate the duct to ensure that the contact surface
temperature is below 85 °C.
Water leak.
If the above conditions are not ensured, another location must be
chosen for the evacuation of combustion gases.
ÿ Make the water inlet [1] and outlet [2] connections using the
supplied or recommended connection accessories.
DANGER:
RECOMMENDATION:
2.
1.
Machine Translated by Google