Zeus Appollo WIFIKIT, Руководство пользователя

Страница: 17 / 38

15
Before troubleshooting, please ask your inverter installer whether you are permitted to
remove the cover of the inverter to trouble shoot the module. If this is not acceptable, please
contact customer service.
4) Setting the parameters of the Wi-Fi module
(a) Open your web browser, and enter 10.10.100.254 (the default IP address of WiFi-Kit,
you may set the domain name access, please see the picture 2.4.5), then fill in the
username:
admin and password: admin , both of which are admin as default.
Recommended browsers: Internet Explorer 8+, Google Chrome 15+, Firefox 10+
Note:
① In order to make sure the setting goes smoothly, you need to check following points:

Set your Wi-Fi router to DHCP mode

For single phase inverters, connect the cable to an RS485 interface and ensure the RS485 card inserted
securely
② The default username & password is : admin, admin. We suggest changing the username & password:
Step: choose “Account”, input your username & password.
Picture 2.4.5
(b) In the configuration interface of the Wi-Fi module, you can view general information
of about the module.
Follow the setup wizard to start the quick setting.
admin
admin