Zeus Appollo WIFIKIT, Руководство пользователя

Страница: 26 / 38

24
RJ-45 connector line
Confirm the status of
inverter and ensure it’s
working condition is
normal
Light X X Flashing In the AP Mode Set network settings
Light X Flashing Dark
Collector is not
connected with
WIFI
Confirm if the antenna is
loose or fall off. If so,
please screw it.
Check if the Wi-Fi wanted
is covered.
Restore the factory
settings according to the
installation manual and
reset.
Light Light Dark Light
Fail to connect the
remote server
Please confirm that Wi-Fi
can be connected with the
Internet.
Light Dark Dark Dark
The system is
initialized
Please wait. If there is no
change in 2min, please
reset the collector.
Note1:x means the status is instability
Note 2: when screw or adjusting the antenna position, please note only the metal part can
be screwed, plastic part cannot be screwed, or the antenna will be damaged
Note3: If the equipment still cannot work according to the above instructions, please
connect your device customer service.
2.6 Register on monitoring website
Our products are supported by PV monitoring system Web site browsers
：
IE8
，
Firefox
，
Chrome
，
Safari
，
log into the website http:// www.monitoring.zeusappollosolar.com.au , click
on register, enter the user registration page, follow the requirements for registration, after
successful registration, enter the mailbox and activity account, then complete the
registration.