Zetronix NANO-4K, Руководство пользователя

Страница: 17 / 20

Most issues can be resolved by resetting the camera
device; press and hold the reset button
6
for 15
seconds while the NANO power switch
7
is set to on.
Also formatting the memory card can clear up any
memory curruption. Please use a computer to do that.
Q&A
Why can't I find or connect the camera's WiFi?

If your camera has already been connected to a router, it will no
longer be available in your WiFi list. Do not worry, this is normal.

Reset is required (See "Resetting the Camera"). Reset the
camera and wait approximately 2 minutes. Then repeat Setup
Instructions.
Why does the camera show "device not on line"?

When you connect it to the router, it may display "device not on
line" during rebooting. Please wait 1~2mins,
until it display s
Online

Please c heck to make sure the connected router is plugged
in and powered on. Check the router wireless WiFi to make sure it
is set to 2.4G, it should not be on 5G.

A RESET and reconnection of the camera may be necessary if
the steps above do not work. See "Resetting the Camera" if a
reset is required.
TROUBLESHOOTING
PAGE | 14