51
predetermined choices until a suitable one appears, or directly entering a numeric value or
an alpha label. In the case of choosing from a list, the technician presses the SPACE BAR
(or the left/right arrow keys) to step through the list and then the ENTER key to accept the
choice displayed. In the case of direct entry parameters, a number or text string (within the
limitations of the parameter) is typed in, followed by pressing the ENTER key. The
parameter selected for programming can be changed at any time by using the up / down
arrow keys.
An important thing to remember is the difference between using the ESC key or the F10
key to leave a window. In windows that allow you to enter or change information, if you
use the ESC key to exit the window the program will also abandon any of the changes you
made. If you want to save your changes, you will need to use the F10 function key to exit
the window.
Default Files
When the ZIPR program is installed, a number of “default” files are provided with it.
When the function (O)pen is selected from the (F)iles menu, a list of these files will be
displayed. The files will be labeled to indicate which model of remote they apply to and
what sort of system configuration they support. A sample of these is shown in
.
Figure 15: Opening a File in ZIPR
Warning!
These default files should be used for training only. They
should NOT be used for an actual upload because of the
possibility of a firmware version mismatch. A firmware version
mismatch may result in erratic operation or a total hardware
lock up. Programming a remote should always be done with a
configuration that is “read” from the remote to be
programmed.
STOP
Содержание 280
Страница 1: ...Model 284 Digital Tone Remotes Product Manual 025 9346N ...
Страница 46: ...Installation 46 025 9346N ...
Страница 82: ...Programming 82 025 9346N ...