Zetor PRIMO HT 20 NC, Руководство оператора

Страница: 114 / 134

Checks and Service
General Information
This section provides detailed information about the service procedures necessary to maintain trouble-free
operation of the machine. Specific values for individual tasks can be found in the attached table.
Service Inspections
Service inspections are performed as follows:
The first service inspection when the hour meter is at a maximum of 50 hours of operation, but no later than
within 6 months from the commissioning of the tractor.
The second service inspection after another 450 hours of operation (with a maximum of 500 hours of
operation), but no later than 12 months after the first service inspection.
Further service inspections always after another 500 hours of operation, but no later than 12 months from the
previous service inspection.
Engine Oil and Filter Change
The first change of the engine oil when the hour meter is at a maximum of 50 hours of operation, but no later
than within 6 months from the commissioning of the tractor.
The second change of the engine oil after another 200 hours of operation (with a maximum of 250 hours of
operation), but no later than 12 months after the first service inspection.
Further engine oil changes, always after another 250 hours of operation, but no later than 12 months after
the previous service inspection.
Performing service inspections is part of tractor maintenance.
Authorized Zetor services will provide you with professional inspections according to the manufacturer's
instructions.
MAINTENANCE
113