Zetor PRIMO HT 20 NC, Руководство оператора

Страница: 109 / 134

High Capacity Fuse (50 A)
For electrical wiring, the tractor is equipped with three fuses.
To protect the electrical circuit, the fuses will blow and the power supply will be disconnected. Determine the
cause of the blown fuses and replace them with the original spare ones.
Check
You can check whether the fuse is blown through the transparent window.
Light Bulb Replacement
If a light does not turn on when the corresponding switch is switched on:
1. Check the corresponding fuse.
2. If the fuse is OK, remove the bulb from the light.
3. Remove the bulb from the socket and check for burnt filaments.
4. If the filaments are burnt, replace the bulb with a new one of the same value.
1 - High Capacity Fuse
PRIMOHT20NC_0112
1 - Normal Condition
2 - Open Circuit
PRIMOHT20NC_0113
Bulb Specification
Headlight 12 V H 8 35 W
Turn Signal Light
(left) 12 V 21 W
Turn Signal Light
(right) 12 V 21 W
Position Light 12 V 5 W
MAINTENANCE
108