Zetor COMPAX CL 25 NC, Руководство оператора

Страница: 97 / 108

TROUBLE CAUSE MEASURE
Engine White smoke from the
exhaust
Oil level too high
Low level of fuel or bad
quality fuel
Reduce to the correct
amount
Contact an authorized
service
Reduced engine power Clogged injectors or
carbon on them
Low compression
Leaking valve seat
Incorrect valve play
Incorrect valve timing
Lack of fuel
Clogged air filter
Contact an authorized
service
Refill tank and check fuel
quality
Clean the element
The oil indicator light
comes on when the
engine is running
Low oil level
Low oil viscosity
Defective pressure
switch
Clogged oil filter
Refill to correct level
Replace with correct oil
Replace the defective part
Contact an authorized
service
The alternator indicator
light comes on when
the engine is running
Defective power line
Defective alternator
Defective battery
Broken or loose
alternator belt
Contact an authorized
service
Add or replace
Replace or adjust
TROUBLE CAUSE MEASURE
Clutch Clutch slips Improper adjustment Adjust the correct play
Worn or burned lining Contact an authorized
service
The clutch cannot be
disengaged
Improper adjustment
Rusty clutch lining
Adjust the correct play
Contact an authorized
service
Brake The brake does not work Incorrect free play Worn
or burned lining
Adjust the correct play
Contact an authorized
service
Brake pedal does not
return
Defective return spring
Lack of lubricant in
joints
Replace the spring
Remove rust and lubricate
with grease
Hydraulic
system
Hydraulics does not lift
the implement
Low engine speed
Lack of transmission oil
Air in the system
Clogged suction filter
Defective pump
Defective hydraulic
valve
Defective cylinder
Increase the engine speed
Refill the oil to the correct
level
Repair or replace the pipe
or replace the O-ring in
the joint and tighten
Clean and change oil
Contact an authorized
service
Oil leaks from lines Loose lines joints
Cracked lines
Tighten the joint
Repair or replace the lines
The relief valve squeaks
while lifting
Incorrectly adjusted
limiter
Adjust the limiter
For other hydraulic problems, contact an authorized service that has the correct
equipment to perform diagnostics and repair the system.
TROUBLESHOOTING
96