Zetor COMPAX CL 25 NC, Руководство оператора

Страница: 70 / 108

Checks and Service
This section provides detailed information about the service procedures necessary to maintain trouble-free
operation of the machine. Specific values for individual tasks can be found in the attached table.
Pre-Start Checks
To avoid problems it is recommended that a range of checks be carried out daily before starting the tractor.
Engine Coolant
Remove the radiator cap and make sure that the coolant reaches up to the filler neck and that it is clean and
contains the correct antifreeze or corrosion inhibitor.
If corrosion is evident in the coolant, completely drain the system and fill with a correct mixture of water and
antifreeze or corrosion inhibitor.
Engine Oil
Remove the dipstick, wipe it and immerse in the oil pan. Make sure the oil level is between the upper and
lower mark, near the upper mark. If the oil level is not as specified, top up with the specified oil.
1 - Engine Oil Dipstick
2 - Upper Mark
3 - Lower Mark
4 - Engine Oil Filter
5 - Filler
6 - Drain Hole
Important: Do not overfill the crankcase with oil.
1 - Drain Valve
2 - Radiator Cap
MAINTENANCE INSTRUCTIONS
69