TOPAZ
– Technical Guidelines
4
Figure 1-2 PaintBrush Position Window
d.
In the
PaintBrush Position
window (refer to
Figure 1-3
):
i.
Define the
Fork Offset
if different than default.
When PaintBrush is connected, the Fork Offset value is set automatically. The
Fork Offset
value is the length of the probe holder (from the front of the
scanner to the rotation point of the wedge).
ii.
Define the
Orientation Preset
.
Orientation of the scanner according to the
scan
and
index
axes
iii.
Define the Scan
Preset
.
Distance between the scanner reference point and the origin of
scan
/
index
coordinate system along the
scan
axis.
iv.
Define the Index
Preset
.
Distance between the scanner reference point and the origin of
scan
/
index
coordinate system along the
index
axis.
v.
You can also move the PaintBrush on the display by tapping on any corner or
rotate it by tapping directly on it.
