User Guide of ZT-30P
6
Issue 1 / Rev.1
3
Installation
1). Shown Fig.3, after screwing Top / Base Covers & Sunshade, place the detector in
its designated locations on the wall and secure it with the provided three (3)
fasteners through three (3) holes of detector mounting bracket.
Release the locking three (3) “Hexagonal Socket Set Screws” in such a way that
allows rotating detector and point the detector towards the protected area and
make certain the view of area I unobstructed.
Secure the detector that position by tightening the
locking three (3) “Hexagonal
Socket Set Screws” on the mounting bracket.
Figure 3. Final installation & Adjustment
