Zeta Alarm Systems.
ZNDC Installation and Operation Manual
Revision 1.0
Part # MAN-ZNDC-01
Page 13
4. Programming
4.1
At the Panel
4.1.1 Classic 2000 Mk II
Scan ZNDC into the panel.
First, go to the Programming menu by hitting the PROG key.
Choose option 3, NETWORK.
Choose option 1, SCAN. Once the ZNDC is scanned in, you’re ready to go!
4.1.2 Sigma Mk II
Scan ZNDC into the panel.
Start by holding the “Select” key and the “Enter” key down at the same time.
Hit the “Select” key until the screen reads “nEt.”
Hit “Enter” to scan the network. Once the ZNDC is scanned in, you’re ready to go!
