Zeta PREM1ER QUATRO, Руководство по установке

Страница: 12 / 13

PREMIER QUATRO ZT-TSRI Installation Manual Firmware Version: 2_0z3
12
Doc No: GLT-281-7-1 Issue: 1.1 Author: TE DATE: 16/11/2016

To restore a backup of data on a computer, click on "Choose file", select the file of
Backup data to restore. Finally click on "Upload Config/Data".
To perform a Configuration Backup / Restore:
This includes the settings of the repeater itself (except network settings).

To Backup , Click on "Configuration Backup". In the Browser that shows select a
name and a location to save the Backup.

To Restore a backup of data on a computer, click on "Choose file" then choose your
config file, and click on "Upload Config / Data".
To perform a Configuration / Data Backup / Restore:
This includes repeater Configuration (excluding network configuration) in addition to the
Area/Zone Configuration.

To Backup , Click on "Backup data + Configuration” and select a name and a location
to save the Backup.

To Restore , Click on "Select file", the find the Data Configuration file to
restore. Finally click on "Upload Config / Data".
4.9 Devices
The digital repeater allows you to locate different types of devices in the form of icons and
associate them with an area. To configure them, click on and then the " Devices " tab.
4.9.1 Parameters to be configured per device

Description: A description that we give to the device.

Area: The area to which the device belongs to.

I Normal: The icon to be shown when that device is in the " Normal " state.

I Fault: The icon to be shown when that device is in the " Fault " state.

I Alarm: The icon to be shown when that device is in the " Alarm " state.

Video: A video file associated with the device.

P/L/D: The Panel/Loop/Device (address) associated with the device (make sure this
is correct).

Type: The type of device (e.g.
detectors, modules, sirens or flash,
cameras, tactile devices, central,
repeaters, extinguishers ... etc).

Model: Device type subdivision (e.g.
For detectors they can be MKII-
AOH/MKII-AOP/MKII-AHR/MKII-AHF
etc.)

AUX: For if you need to write a note
about a device

Place: Allows us to place the device in the selected area. We can also select the size
of the device sliding the zoom bar on the right.