Zeta Alarm Systems ZT-20EX Скачать руководство пользователя страница 7

Страница: 7 / 15

User Guide of ZT-20EX & ZT-500EX

3 Installation

The detector can be mounted on the wall with either of two kinds of Swivel
Mounts, (TM-AL10 in aluminum and TM-ST10 in SS316) which are optionally
selectable by customers when ordering the detector.

Figure 6. Swivel Mount (TM-AL10)

Figure 7. Swivel Mount (TM-ST10)

Figure 8. Installed Detectors on wall

1). Place the Swivel Mount in its designated location on the wall and secure it with the

provided four (4) fasteners through four (4) holes of dia. 5.0 or 6.0mm.

2). Put the mounting pole of detector into the mounting hole of Swivel Mount and

secure the detector by screwing the locking screws on Swivel Mount.

3). Release the locking screws on Swivel Mount in such a way that allows rotating the

Detector which is combined the mounting hole of Swivel Mount.
Point the detector towards the protected area and make certain that the view of

Содержание ZT-20EX
















Результаты поиска

Содержание ZT-20EX

Отзывы:

Похожие инструкции для ZT-20EX

Бренды по названию

Популярные бренды

Zeta Alarm Systems ZT-20EX, Руководство пользователя

Результаты поиска

Содержание ZT-20EX

Отзывы:

Похожие инструкции для ZT-20EX

Бренды по названию

Популярные бренды