Zeta Alarm Systems ZD-CO-9B, Руководство пользователя

Страница: 14 / 22

13
MAINTAINING /
TESTING YOUR
DETECTOR
Maintenance
Your detector will alert you to potentially
hazardous CO concentrations in your home
when maintained properly. To maintain your
Zeta detector in proper working order, and to
ensure that the sensor will last for the lifetime of
the product, it is recommended that you:
• Test the sounder, batteries and circuitry of
your detector once per week by pressing
and holding the Test/Reset button for 1
second (see page 9)
• Perform the Sensor Test annually
(see page 9)
• Keep the detector free of dust by gently
vacuuming the case with a soft brush
attachment when required.
To prevent the possibility of contaminating the
sensor in your detector and thus affecting its
reliability:
• Never use cleaning solutions on your
detector. Simply wipe with a slightly damp
cloth
• Do not paint the detector
• Do not spray aerosols on or near the
detector
• Do not use any solvent based products
near the detector
• Move the detector to a safe location and
store in a plastic bag before painting, wall
papering, or performing any other activities
using substances that emit strong fumes.
Remember to remove it from the bag and
return the detector to its original location
when these activities are finished
Failure of any test should be reported to
the technical support line (see page 19 for
contact details).
Do not attempt to repair your CO detector.
Do not remove any screws or open the main
casing of your detector. Any attempt to do so
may cause malfunction and will invalidate the
warranty.