Zesto Audio 2016 Page #7
Hookup, Settings and Adjustments
Before you start you will need:
1. RCA Interconnect cables to your system
2. Turntable cables, RCA or XLR
3. Manufacturer specs on your Phono cartridge
•
Is your cartridge MM or MC?
•
Is your MC cartridge high or low output?
•
What is the recommended Ohms load for MC cartridge?
Proper Care of your Vacuum Tube Phonostage
Very Important Read First
The simple rule to remember is “Turn on first, Turn off last”.
It is customary for vacuum tube equipment, as it is first turned on, while the unit is powering up, to have a brief initial
“hum” coming from the unit, not from the speakers.
It is very important that all of your audio equipment is
turned off
or unplugged from the main power before attempting to
install this unit.
It is recommended that during normal operation this unit is
turned on first
for at least 5 minutes before turning on the rest
of your system to prevent damage to your equipment and to get the best performance from the phonostage.
You should also
turn off
your power amplifiers before making any adjustments to the phonostage.
In addition it is also strongly recommended that this unit is
turned off
last
after the rest of your system has been turned
off to prevent damage to your equipment.
Remember “Turn on first, Turn off last”.
Not doing so may create a very loud noise that could damage your speakers or other equipment.