Zesto Audio 2011 13
Hookup, Settings and Adjustments
Cartridge Set up
If using an MC cartridge select the ground ON position to start with.
Select MM or MC on the switch.
If using an MM cartridge there are no other switches to select.
If using an MC cartridge select High or Low output on the phono-
stage.
Feet
Your unit is installed with award winning Isonode anti-vibrational feet.
Please note that the 4 feet are installed asymmetrically. You will find
3 feet on the left side to support the weight of the power supply and
only one foot on the right. Optional to keep clear plastic circles at-
tached to protect surfaces.
Power
Carefully plug in the AC power cable to the phonostage first then to
your main power.
Turn it on
Turn on the phonostage using the ON/OFF switch located on the
front left side. After a short time (about two minutes) the four tubes
should start glowing. The amber glow will be the only visible indica-
tion that the unit is turned on.
If they don’t, turn off the unit at the power switch and unplug the pow-
er cord. After waiting a few minutes unplug each vacuum tube in turn
(using the glove provided) and make sure that none of the pins are
bent. If they are please contact Zesto Audio for instructions.
After waiting 5 minutes turn on the rest of your system.
Enjoy the music!
