Rabbit Hutch 1.2m is now complete.
1.
Fix Back Panel A to Side Panels B using 6no 50mm Screws, 3no per side (Figs.1a & 1b)
2.
Fix Front Panel C to Side Panels B using 6no 50mm Screws, 3no per side (Figs.2a &
2b)
3.
Attach Floor Panel D to Back Panel A and Front Panel C using 6no 30mm Screws
– 2no
into Back Panel A and 4no into Front Panel C (Figs.3a & 3b).
With the assembly laid on its back and the entry ramp fully opened, further attach Floor
Panel D to Side Panel B using 3no 50mm Screws as shown in Fig.3c.
4.
Fix 8no Braces E as shown in Fig.4 using 16no 50mm Screws
– 2no per Brace E.
5.
Attach Internal Panel F to battens of Back Panel A and Front Panel C as shown in
Fig.5a using 6no 50mm Screws
– 3no into each panel.
Further attach Internal Panel F to Floor Panel D using 2no 40mm Screws (Fig.5b).
6.
Position Roof Panel G centrally over assembly and attach using 12no 40mm Screws
–
4no into each of the Back and Front Panel A and C and 2no into each Side Panel B
(Fig.6).
7.
Fix Felt H to the Roof Panel G using 28no equally spaced Felt Nails around the sides as
shown in Fig.7.
8.
Attach Front and Back Fascias J to Roof Panel G using 10no 40mm Screws
– 5no per
Fascia J (Fig.8a)
Attach Side Fascias K to Roof Panel G using 6no 40mm Screws
– 3no per Fascia K
(Fig.8b)
Rabbit Run
– Optional Extra
9.
With the assembly up side down Place Rabbit Run Back Panel L between legs of Side
Panels B and fix in position using 7no 50mm Screws
– 2no into each leg and 3no into
Back Panel A (Figs.9a & 9b).
10. Place Rabbit Run Side Panels M between legs of Side Panels B and fix in position using
12no 50mm Screws
– 2no per Side Panel B (Fig.10a) and 2no per leg of Side Panel B
(Fig.10b).
11. Place Rabbit Run Front Panel N between legs of Side Panels B and fix in position using
7no 50mm Screws
– 2no into each leg and 3no into Front Panel C (Figs.11a & 11b).
