2
To ensure that your Zest equipment provides the user a safe and opti-
mal functionality and is kept in pristine condition, it is vital to establish a
“Daily quick function & maintenance inspection in 11 steps”.
This inspection is quick and easy to follow:
DAILY QUICK FUNCTION & MAINTENANCE CHECK
where applicable
See
page
1
Inspect for loose nuts and bolts - tighten as required
3
2
Check the ease of functioning of the pull-pin or other methods of ad-
justing distances or angle positions.
3
3
Check alignment of the weight plates by inserting the weight stack
pin in random positions.
3
4
Check the operating smoothness of the weight-stack by lifting the
stack a few times to its highest position.
3
5
Check the free movement before the weight-stack is lifted if more
then 15mm cable tension should be adjusted.
4
6
Inspect the cable for kinks, damaged or worn outer sheath and ex-
posed cable wire (including all connection points).
With any visual damage replace cable immediately.
4
7
Check the upholstery for dirt, rips and tears - clean at least twice a
day.
5
8
Inspect handgrips for wear and tear - replace as necessary.
5
9
Check the bushes for wear or excess friction by performing the exer-
cise
5
10
Ensure the readability of all instruction cards and warning labels, re-
place if necessary.
6
11
Inspect the overall cleanliness of the unit, check also for scratches
and corrosion.
6
Overview typical LUXLINE units and their parts
7-8
Warranty
9
Annex: Cable & Upholstery Specification Form
10-11
