www.zest4leisure.co.uk | 01352 752555 option 1 | [email protected]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: 13mm & 19mm Sockets & Ratchet, Cordless Drill & Pozi-drive Bit/ Pozi-
drive Screwdriver, Hammer.
10. Locate Shelves (K) onto Long Braces (D) (see Fig 10).
11. Position Slats Support (L) with bolt hole (circled in Fig 11a) rearmost. Align with bolt hole in Back Leg (A2)
and fix using 1no 110mm bolt. (see Figs. 11a & 11b).
Repeat procedure to attach remaining Slat Support (L) to Back Leg (A3). Ensure both Slats Supports
(L) are inclined equally and fix into Front Legs (A1) & (A4) using 2no. 100mm screws (1no. screw per leg).
(see Fig 11c).
Fully tighten nuts at this stage.
12. PLEASE NOTE: PLASTIC STRAPPING SHOULD NOT BE REMOVED FROM CANOPY SLATS
Equally space Canopy Slats (M) onto Slats Supports (L), ensure equal overhang at both sides and fix first
and last slats using 4no. 40mm screws (2no. per slat, 1no. per end). Fix all intermediate slats using 60mm
screws (2no. screws per slat) (see Figs 12a & 12b).
13. Insert (rotate and flex simultaneously) Centre Battens (N) and once positioned equally, attach to slats
using 32no. 30mm Screws (16no. screws per Centre Batten (N)). (Figs. 13a, 13b & 13c).
