Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: 01352 752 555 Option 1 or email:
[email protected]
Assembly requires 2 persons.
Tools required: 10mm Spanner, Slotted (Flat-head) Screwdriver, 4mm Hex (Allen)
Key.
Emily Bench 4ft is now complete.
1.
Locate Seat Assembly (A) into Side Assemblies (B) ensuring bolt-holes are
aligned and insert 2no bolts per side (See Figs 1a & 1b). Locate washers and carefully
thread nuts on to bolts, but do not tighten fully at this stage.
2.
Insert 4no Cross Dowels into 10 mm holes to rear of Back Assembly (C) ensuring
slots face outwards (as shown in Fig 2a, which allows for aligning dowels with bolts
using a slot head screwdriver). Position the Back Assembly between side assemblies
(Fig 2b) and insert 2no bolts per side and carefully thread bolts into cross dowels,
(Figs 2c & 2d)
3.
Finally, ensure ALL nuts and bolts are fully tightened.
Содержание Emily Bench 4ft
Страница 4: ...www zest4leisure co uk 1b 1a 2a 2b 2c 2d...
