www.zest4leisure.co.uk | 01352 752555 option 1 | [email protected]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Torx Bit Included)
1. Attach Leg Assembly A to Rail B using 1no 140 mm screw as shown in Fig 1a.
Similarly attach remaining Rail B to opposite side of Leg Assembly A using 1no 140 mm screw
Attach remaining Leg Assembly A to opposite end of Rails B using remaining 2no 140mm screws (1 per
rail). See Fig 1b.
2. Attach leg frame to Table Top C using 8no 110mm screws (2no screws per side). See Fig 2
1a
2
1b
