ZEROXCLUB Instructions Manual
9
the cables in open areas.
●
Secure the cables using adhesive 3M type
¼”
cable clips and/or
zip ties.
●
You may have surplus cable length remaining in your installation.
If this is the case, find a convenient place to bundle the cable with
zip ties and securely hide it out of site. We do not recommend
shortening the cable by cutting and rejoining it.
●
You should also make sure the monitor only starts after ignition,
so that you can preserve your battery. You can find the
corresponding connection for the fuse box according to the manual
for your car and model.
NOTE:
1) Before connecting, you need to confirm that the voltage of the
battery is between 12-24V.
2)Rear cameras are usually powered by the reverse lights.
This makes them more convenient to use as the monitor and the
camera will automatically turn on when you shift the gear into
reverse.
2.6 Testing the System
If you are using a car charger, simply start the ignition and the
camera will be activated. If you are using a DC Power Pigtails
Cable, you will also need to change to reverse gear and your
backup camera image should come on.
NOTE:
If there are any issues, then do not panic. Slowly check
every single connection, and make sure that everything is correct.
