ZEROXCLUB Instructions Manual
3
Here
’
s a step-by-step backup camera installation guide to make things easier for you.
The wiring method when product use, as follows:
(1)
Connect the
Yellow
wire to positive power( 12-24V)
NOTE:
The
Yellow
wire needs to be powered for a long time. If
the
Yellow
wire has no power, the system will lose all the
settings you made on the screen. We recommend that you
connect the
Yellow
wire to the (+) positive terminal of the car's
battery so that the system can save the settings and you will
not have to reset them the next time the system is enabled.
(2)
Connect the
Red
wire to ACC
(Car Key power. DC 12V ~24V)
/ DC 12V Battery / Reversing light / Driving light
The
Red
wire is connected to the car ignition wire ACC switch
(which is the gear switch before starting up the car's motor),
when the car key is turned on, the device will start
automatically, and if the vehicle key is turned off, it will
automatically turn off.
